How to do a Complete Brake Flush and Bleed
How to Do a Brake Fluid Flush. Learn how to do a complete brake system flush to remove all of the old, water logged brake fluid out and replace it with fresh new DOT 3 brake fluid. I show you the two person method and the one person method to bleed the brakes. I also show you how to bleed drum brakes and disc brakes as well as the correct order to bleed them for a complete flush.
Here is the tubing you need for the brake bleeder: http://amzn.to/1RQyTyF
One Person Brake Bleeder: https://www.youtube.com/watch?v=1wwq1Vlk4Wg
Everything you Need to Know About Brake Fluid: COMING SOON
Wheel Cylinder Replacement: https://www.youtube.com/watch?v=GIWYkCOPAQ0
How to Replace Drum Brakes: https://www.youtube.com/watch?v=zJ_UXP6GWkw
**If the video was helpful, remember to give it a “thumbs up” and consider subscribing. New videos every Thursday**
-Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7
-YouTube Channel: https://www.youtube.com/ChrisFix
Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.
There’s no doubt that your brakes are the most important part of your
vehicle. What would happen if your car did not have brakes? It is very
important that your car is able to stop when you need it to. Even race
car drivers can tell you that being able to stop is more important than
having a powerful engine. Keep in mind that changing your pads early is
always better than changing them when it’s too late. By changing your
brake pads early, you’ll be safe on the road and save money on expensive
repairs. So, when is it time to take your car to a brake repair
mechanic for brake pad replacement?
How Often Your Need to Replace Your Pads
You may not have to replace your pads for tens and thousands of miles.
How often you need to replace them depends on your driving habits and
the type of vehicle you own. The more you use your brakes, the more
often you will need to replace them. If don’t replace your brake pads in
time, your vehicle may not be able to stop efficiently and it can lead
to a dangerous accident. Therefore, maintenance of your braking system
plays an important role in the performance of your car!
Examine Your Brake Pads
You can examine your brake pads to see if they are worn out. If you
examine your front tires, you should be able to see your brake pads.
However, if your pads are worn out, you may not be able to see them. In
order to see your brake pads, you may have to remove your wheel. If you
remove your wheel, you will see the outside brake pad. If you look at it
from above, you will see the pad pressing against the metal rotor. If
you don’t know what you’re doing, take your car to an auto repair shop a
brake repair mechanic for a professional inspection.
Check the Depth of Your Pads
If you see that the depth of your brake pads are less than 1/4 inch, you
need to replace them. If they’re less than 1/8 inch, you’re getting
very close to damaging your rotor. If this is the case, you need to
replace them as soon as possible! Keep in mind that one brake pad may be
thinner than the other; this is normal. It’s also important to note
that when the pads are severely worn down, it can lead to grooves and
circular-shaped marks in the rotors. These marks are also a sign that
the pads need to be replaced.
Choosing Brake Pads For Your Vehicle
Basic brake pads are suitable for most drivers. However, these pads can
cause serious problems when subjected to severe driving conditions or
installed on high-performance cars! In addition, brake pads that are
designed for normal driving will make more noise and produce more dust.
If you live in a hilly area, drive in an aggressive manner, or carry
heavy loads often, you should consider severe-duty brake pads. If you’re
still not sure which pads are best for your car, consult with an
experienced brake repair mechanic. You can also peruse your owner’s
manual for pad replacement intervals and brake-related recommendations.
Brake Repair Mechanic, Brake Repair, Brake Pads, Repair Mechanic, Replace Them
Source: Free Articles from ArticlesFactory.com
ABOUT THE AUTHOR
Having breake issues? Take your vehicle to a solid brake repair
boston specialist. View the services of one company here: